THIXO PA – Thixotropic agent

    This product is used when you want to apply vertically the silicone rubber. It can be used with all Feingosil Series 300.
    First at all add the catalyst to the base, then add 2 ÷ 4 % of THIXO PA on the weight of the silicone rubber. Mix for 3-5 minutes.
    You get a very viscous mass, which can be applied in vertical. With a brush or a spatula, spread the thixotropic silicone rubber to form a layer of 5-10 mm.
    If necessary, repeat after 4-6 hours (before the silicone rubber is completely cured) to obtain a mould with good strength (20-40 mm).

    Properties

    ASPECT: Liquid
    CHEMICAL CHARACTERIZATION: Thickening agent for RTV-2
    COLOUR/ODOUR: Beige/Odourless
    VISCOSITY: 1000 MPa·s
    MIX RATIO: 2 ÷ 4 % on the weight of the RTV-2

    * The data given are typical values which are not intended for use in preparing specifications. The information given here is based on our present state of knowledge and is published without obligation on our part. Test has done at 23°C and 50% of RH.

    DATA SHEETS

    Login to consult the product data sheets.

    If you do not have an account, sign in 

    Ask more information about this Feinchimica product

    Fill in the form, we’ll contact you soon. We’ll give you all the information you need.

    1 + 14 =